Inspect the sealing surfaces of every lip, center, and barrel to assure that each of them are clean and finished to a matte quality. If these surfaces are not identical to the ones pictured, then stop here and proceed to clean them. It is very important that these surfaces are clean to ensure a proper seal between the wheels, lips, and barrels.


Note: Removing old silicon from the previous seal can be done relatively easily with any xylene, tolyene, trichloroethane, naptha, or denatured alcohol based chemical and Scotch-Brite.

It speeds up the process if you have all components completely prepared before tackling the rebuild.


This is the ideal state for all of the surfaces that will be sealed. Note the matte / brushed appearance.



Make sure not to leave any silicone between the bolt holes.

1 comment:

  1. Basically, the flow vaguely recalled that before he became a river, was perhaps the wind had carried halfway up a high mountain, where he became rain fell on the ground and has become what it is now.Buy WOW Gold
    WOW Items Gold
    Buy WOW Items
    WOW Gear

    ReplyDelete